Fastap Plus® For Decks, Stairs, Cedar, Redwood Or Any Exterior Carpentry
Available in three head styles and three drive types in sizes up to 6'' all with premium DuracoatXT® corrosion protection
Fastap® started the coated exterior screw category well over 30 years ago as a cost effective, performance oriented fastener using the latest in anti-corrosion coatings technology. Now with their third generation coating technology, Fastap Plus® exterior screws with exclusive DuracoatXT® coating and Power Point™ self drilling technology, are the go-to choice for outdoor or harsh environment projects where rust and corrosion is not wanted. More cost effective than stainless steel, and with greater shear load
...READ MORE
capacity, they have been engineered to save you time with an easy, labor saving one-step installation that will make your project be as good as it can be for a long time. Today's wood treatments, the naturally occurring tannins in wood and harsh coastal weather (see the ridiculous "do not use within 5 miles of a coastline" exterior fastener disclaimer at your local big box store) can really play havoc with some fasteners. Fastap's premium DuracoatXT® has been engineered for harsh environments and it is best-by-test in ACQ, CCA, & CA-C treatments*, far outlasts galvanized in real world application and won’t chip or peel from installation friction like colored ceramic coatings do. Great for Redwood, Cedar or any wood rich in corrosion inducing tannins. Also because soft, high moisture content woods are now the norm instead of the exception, Fastap Plus' coarse drive threads and Power Point™ tip technology can deal effectively with these types of materials delivering increased holding power with less possibility of spin-out while offering true self drilling ease into all woods. Even woods hardened by years of seasoning and drying out as can be experienced in any home remodel. Once you try them we think you'll never use anything else. Fastap Plus® exterior screws have the features you need: Premium DuracoatXT® coating, popular head configurations, coarse drive threads and long shanks for tighter draw-down and the Power Point™ self drilling tip. Available in easy release Phillips, stick-fit square/Robertson and genuine stick-fit Fastap Star Drive™. Please note that Fastap Star Drive™ bits must be used to achieve full Fastap Star Drive™ performance features. All Fastap Star Drive™ screw products sold on SOF come with the appropriate Fastap Star™ bit. Clicking on the photos or “Tech Info” buttons will give you more detail on the specific size screw product.
*See the independent test results in ''More…/Test Data/DuracoatXT® Test Results''.
Place your order within
60 minutes and we'll ship it
today.
1¼'' #2 Square Drive
Fastap Plus®
Flathead with Nibs
1¼'' #2 Square Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 1¼''
Shank Length: ¼''
Coating: DuracoatXT®
Thread Length: 1''
Drive Type: Square
Diameter: 8
Head Type: Flathead with Nibs
1⅜'' #2 Phillips Drive
Fastap Plus®
Flathead with Nibs
1⅜'' #2 Phillips Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 1⅜''
Shank Length: ⅜''
Coating: DuracoatXT®
Thread Length: 1''
Drive Type: Phillips
Diameter: 8
Head Type: Flathead with Nibs
1⅜'' #2 Square Drive
Fastap Plus®
Flathead with Nibs
1⅜'' #2 Square Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 1⅜''
Shank Length: ⅜''
Coating: DuracoatXT®
Thread Length: 1''
Drive Type: Square
Diameter: 8
Head Type: Flathead with Nibs
1⅜'' T20 Fastap Star™ Drive
Fastap Plus®
Flathead with Nibs
1⅜'' T20 Fastap Star™ Drive Fastap Plus® Exterior Carpentry
Drive Size: T20
Total Length: 1⅜''
Shank Length: ⅜''
Coating: DuracoatXT®
Thread Length: 1''
Drive Type: Fastap Star™
Diameter: 8
Head Type: Flathead with Nibs
1¾'' #2 Phillips Drive
Fastap Plus®
Flathead with Nibs
1¾'' #2 Phillips Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 1¾''
Shank Length: ¾''
Coating: DuracoatXT®
Thread Length: 1''
Drive Type: Phillips
Diameter: 8
Head Type: Flathead with Nibs
1¾'' #2 Square Drive
Fastap Plus®
Flathead with Nibs
1¾'' #2 Square Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 1¾''
Shank Length: ¾''
Coating: DuracoatXT®
Thread Length: 1''
Drive Type: Square
Diameter: 8
Head Type: Flathead with Nibs
1¾'' T20 Fastap Star™ Drive
Fastap Plus®
Flathead with Nibs
1¾'' T20 Fastap Star™ Drive Fastap Plus® Exterior Carpentry
Drive Size: T20
Total Length: 1¾''
Shank Length: ¾''
Coating: DuracoatXT®
Thread Length: 1''
Drive Type: Fastap Star™
Diameter: 8
Head Type: Flathead with Nibs
2'' #2 Phillips Drive
Fastap Plus®
Flathead with Nibs
2'' #2 Phillips Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 2''
Shank Length: 1''
Coating: DuracoatXT®
Thread Length: 1''
Drive Type: Phillips
Diameter: 8
Head Type: Flathead with Nibs
2'' #2 Square Drive
Fastap Plus®
Flathead with Nibs
2'' #2 Square Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 2''
Shank Length: 1''
Coating: DuracoatXT®
Thread Length: 1''
Drive Type: Square
Diameter: 8
Head Type: Flathead with Nibs
2'' #2 Square Drive
Fastap Plus® Finish Head
Finishing Head w/Nibs
2'' #2 Square Drive Fastap Plus® Finish Head Exterior Carpentry
Drive Size: #2
Total Length: 2''
Shank Length: ¾''
Coating: DuracoatXT®
Thread Length: 1¼''
Drive Type: Square
Diameter: 9
Head Type: Finishing Head w/Nibs
2'' T20 Fastap Star™ Drive
Fastap Plus®
Flathead with Nibs
2'' T20 Fastap Star™ Drive Fastap Plus® Exterior Carpentry
Drive Size: T20
Total Length: 2''
Shank Length: 1''
Coating: DuracoatXT®
Thread Length: 1''
Drive Type: Fastap Star™
Diameter: 8
Head Type: Flathead with Nibs
2¼'' #2 Phillips Drive
Fastap Plus®
Flathead with Nibs
2¼'' #2 Phillips Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 2¼''
Shank Length: 1''
Coating: DuracoatXT®
Thread Length: 1¼''
Drive Type: Phillips
Diameter: 9
Head Type: Flathead with Nibs
2¼'' #2 Square Drive
Fastap Plus®
Flathead with Nibs
2¼'' #2 Square Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 2¼''
Shank Length: 1''
Coating: DuracoatXT®
Thread Length: 1¼''
Drive Type: Square
Diameter: 9
Head Type: Flathead with Nibs
2¼'' #2 Square Drive
Fastap HSF™ (Hardwood Surface Fastening)
Flathead with Nibs
2¼'' #2 Square Drive Fastap HSF™ (Hardwood Surface Fastening) Exterior Carpentry
Drive Size: #2
Total Length: 2¼''
Shank Length: 1''
Coating: DuracoatXT®
Thread Length: 1¼''
Drive Type: Square
Diameter: 10
Head Type: Flathead with Nibs
2½'' #2 Phillips Drive
Fastap Plus®
Flathead with Nibs
2½'' #2 Phillips Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 2½''
Shank Length: 1¼''
Coating: DuracoatXT®
Thread Length: 1¼''
Drive Type: Phillips
Diameter: 9
Head Type: Flathead with Nibs
2½'' #2 Square Drive
Fastap Plus®
Flathead with Nibs
2½'' #2 Square Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 2½''
Shank Length: 1¼''
Coating: DuracoatXT®
Thread Length: 1¼''
Drive Type: Square
Diameter: 9
Head Type: Flathead with Nibs
2½'' #2 Square Drive
Fastap Plus® Finish Head
Finishing Head w/Nibs
2½'' #2 Square Drive Fastap Plus® Finish Head Exterior Carpentry
Drive Size: #2
Total Length: 2½''
Shank Length: 1¼''
Coating: DuracoatXT®
Thread Length: 1¼''
Drive Type: Square
Diameter: 9
Head Type: Finishing Head w/Nibs
2½'' T20 Fastap Star™ Drive
Fastap Plus®
Flathead with Nibs
2½'' T20 Fastap Star™ Drive Fastap Plus® Exterior Carpentry
Drive Size: T20
Total Length: 2½''
Shank Length: 1¼''
Coating: DuracoatXT®
Thread Length: 1¼''
Drive Type: Fastap Star™
Diameter: 9
Head Type: Flathead with Nibs
3'' #2 Phillips Drive
Fastap Plus®
Flathead with Nibs
3'' #2 Phillips Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 3''
Shank Length: 1½''
Coating: DuracoatXT®
Thread Length: 1½''
Drive Type: Phillips
Diameter: 9
Head Type: Flathead with Nibs
3'' #2 Square Drive
Fastap Plus®
Flathead with Nibs
3'' #2 Square Drive Fastap Plus® Exterior Carpentry
Drive Size: #2
Total Length: 3''
Shank Length: 1½''
Coating: DuracoatXT®
Thread Length: 1½''
Drive Type: Square
Diameter: 9
Head Type: Flathead with Nibs
3'' #2 Square Drive
Fastap Plus® Finish Head
Finishing Head w/Nibs
3'' #2 Square Drive Fastap Plus® Finish Head Exterior Carpentry
Drive Size: #2
Total Length: 3''
Shank Length: 1½''
Coating: DuracoatXT®
Thread Length: 1½''
Drive Type: Square
Diameter: 9
Head Type: Finishing Head w/Nibs
3'' T20 Fastap Star™ Drive
Fastap Plus®
Flathead with Nibs
3'' T20 Fastap Star™ Drive Fastap Plus® Exterior Carpentry
Drive Size: T20
Total Length: 3''
Shank Length: 1½''
Coating: DuracoatXT®
Thread Length: 1½''
Drive Type: Fastap Star™
Diameter: 9
Head Type: Flathead with Nibs
3¼'' #3 Phillips Drive
Fastap Dock Screw™
Flathead with Nibs
3¼'' #3 Phillips Drive Fastap Dock Screw™ Exterior Carpentry
Drive Size: #3
Total Length: 3¼''
Shank Length: 1¾''
Coating: DuracoatXT®
Thread Length: 1½''
Drive Type: Phillips
Diameter: 10
Head Type: Flathead with Nibs
3¼'' #3 Square Drive
Fastap Dock Screw™
Flathead with Nibs
3¼'' #3 Square Drive Fastap Dock Screw™ Exterior Carpentry
Drive Size: #3
Total Length: 3¼''
Shank Length: 1¾''
Coating: DuracoatXT®
Thread Length: 1½''
Drive Type: Square
Diameter: 10
Head Type: Flathead with Nibs
3¼'' #3 Square Drive
Fastap Plus +Truss™
+Truss Head
3¼'' #3 Square Drive Fastap Plus +Truss™ Exterior Carpentry
Drive Size: #3
Total Length: 3¼''
Shank Length: 1½''
Coating: DuracoatXT®
Thread Length: 1¾''
Drive Type: Square
Diameter: 10
Head Type: +Truss Head
3¼'' T25 Fastap Star™ Drive
Fastap Dock Screw™
Flathead with Nibs
3¼'' T25 Fastap Star™ Drive Fastap Dock Screw™ Exterior Carpentry
Drive Size: T25
Total Length: 3¼''
Shank Length: 1¾''
Coating: DuracoatXT®
Thread Length: 1½''
Drive Type: Fastap Star™
Diameter: 10
Head Type: Flathead with Nibs
3¾'' #3 Phillips Drive
Fastap Plus 10®
Flathead with Nibs
3¾'' #3 Phillips Drive Fastap Plus 10® Exterior Carpentry
Drive Size: #3
Total Length: 3¾''
Shank Length: 1¾''
Coating: DuracoatXT®
Thread Length: 2''
Drive Type: Phillips
Diameter: 10
Head Type: Flathead with Nibs
3¾'' #3 Square Drive
Fastap Plus 10®
Flathead with Nibs
3¾'' #3 Square Drive Fastap Plus 10® Exterior Carpentry
Drive Size: #3
Total Length: 3¾''
Shank Length: 1¾''
Coating: DuracoatXT®
Thread Length: 2''
Drive Type: Square
Diameter: 10
Head Type: Flathead with Nibs
3¾'' T25 Fastap Star™ Drive
Fastap Plus 10®
Flathead with Nibs
3¾'' T25 Fastap Star™ Drive Fastap Plus 10® Exterior Carpentry
Drive Size: T25
Total Length: 3¾''
Shank Length: 1¾''
Coating: DuracoatXT®
Thread Length: 2''
Drive Type: Fastap Star™
Diameter: 10
Head Type: Flathead with Nibs
4½'' #3 Phillips Drive
Fastap Plus 10®
Flathead with Nibs
4½'' #3 Phillips Drive Fastap Plus 10® Exterior Carpentry
Drive Size: #3
Total Length: 4½''
Shank Length: 2''
Coating: DuracoatXT®
Thread Length: 2½''
Drive Type: Phillips
Diameter: 10
Head Type: Flathead with Nibs
4½'' #3 Square Drive
Fastap Plus 10®
Flathead with Nibs
4½'' #3 Square Drive Fastap Plus 10® Exterior Carpentry
Drive Size: #3
Total Length: 4½''
Shank Length: 2''
Coating: DuracoatXT®
Thread Length: 2½''
Drive Type: Square
Diameter: 10
Head Type: Flathead with Nibs
4½'' T25 Fastap Star™ Drive
Fastap Plus 10®
Flathead with Nibs
4½'' T25 Fastap Star™ Drive Fastap Plus 10® Exterior Carpentry
Drive Size: T25
Total Length: 4½''
Shank Length: 2''
Coating: DuracoatXT®
Thread Length: 2½''
Drive Type: Fastap Star™
Diameter: 10
Head Type: Flathead with Nibs
5'' #3 Phillips Drive
Fastap Plus 10®
Flathead with Nibs
5'' #3 Phillips Drive Fastap Plus 10® Exterior Carpentry
Drive Size: #3
Total Length: 5''
Shank Length: 2½''
Coating: DuracoatXT®
Thread Length: 2½''
Drive Type: Phillips
Diameter: 10
Head Type: Flathead with Nibs
5'' #3 Square Drive
Fastap Plus 10®
Flathead with Nibs
5'' #3 Square Drive Fastap Plus 10® Exterior Carpentry
Drive Size: #3
Total Length: 5''
Shank Length: 2½''
Coating: DuracoatXT®
Thread Length: 2½''
Drive Type: Square
Diameter: 10
Head Type: Flathead with Nibs
5'' T25 Fastap Star™ Drive
Fastap Plus 10®
Flathead with Nibs
5'' T25 Fastap Star™ Drive Fastap Plus 10® Exterior Carpentry
Drive Size: T25
Total Length: 5''
Shank Length: 2½''
Coating: DuracoatXT®
Thread Length: 2½''
Drive Type: Fastap Star™
Diameter: 10
Head Type: Flathead with Nibs
6'' #3 Phillips Drive
Fastap Plus 10®
Flathead with Nibs
6'' #3 Phillips Drive Fastap Plus 10® Exterior Carpentry
Drive Size: #3
Total Length: 6''
Shank Length: 3½''
Coating: DuracoatXT®
Thread Length: 2½''
Drive Type: Phillips
Diameter: 10
Head Type: Flathead with Nibs
6'' #3 Square Drive
Fastap Plus 10®
Flathead with Nibs
6'' #3 Square Drive Fastap Plus 10® Exterior Carpentry
Drive Size: #3
Total Length: 6''
Shank Length: 3½''
Coating: DuracoatXT®
Thread Length: 2½''
Drive Type: Square
Diameter: 10
Head Type: Flathead with Nibs
6'' T25 Fastap Star™ Drive
Fastap Plus 10®
Flathead with Nibs
6'' T25 Fastap Star™ Drive Fastap Plus 10® Exterior Carpentry
Drive Size: T25
Total Length: 6''
Shank Length: 3½''
Coating: DuracoatXT®
Thread Length: 2½''
Drive Type: Fastap Star™
Diameter: 10
Head Type: Flathead with Nibs